Home › Forums › Heavens Best Forum › Misc › Waxing concrete
- This topic has 6 replies, 5 voices, and was last updated 18 years, 4 months ago by Bwaite77.
-
AuthorPosts
-
June 27, 2006 at 9:49 pm #143287AnonymousInactive
I’ve been asked to give a quote for sealing the floor of a local business. it’s just the raw concrete subflooring. Has anyone done this before? How’d you do this ?
June 28, 2006 at 7:15 am #146914Ca22ParticipantYou said waxing in the topic and sealing in your message. What do they want the floor sealed or waxed. The only time that I have heard of sealing the floor is when we do pet damage that is down to the subfloor. If this is the case it is just a matter of a long handle, paint roller, and kilz primer. Very easy… If it has to do with waxing sorry can’t help.
June 28, 2006 at 7:17 am #146915AnonymousInactiveThis is a brand new building. There is nothing installed over the subfloor. I meant to say waxing in the body.
July 3, 2006 at 2:21 am #146916AnonymousInactiveRon I have stripped, neutralized, sealed and waxed a few floors, its work man! If all your doing is sealing and waxing, not so bad, the stripping is a bear though. I did it only a few times, more as a favor to some people I know well, otherwise its not something I wouldn’t want to get too deep into. The last time I did it, something in the wax screwed up and I had to do it over, NOT FUN! I charged .35/strip, .08/neutralize, .08/seal and .10 per coat wax (three coat minimum). Humidity may come into play with drying so make sure wax is good and dry between coats. By the way, the last job that screwed up and had to redo, was my last – out of that line forever! Those guys earn their money.
July 3, 2006 at 2:24 am #146917AnonymousInactiveHey man, just realized you were talking bout concrete. I was doing tile, sorry.. Probably a totally different process, good luck.
July 6, 2006 at 1:52 am #146918AnonymousInactiveYou can apply an finish to the floor, just like vinyl tile. The process is the same however if there is any oil, grease, or other foriegn substance on it the finish may not stick and peel prematurely. If a different finish such as paint or an epoxy was to be applied at a later date, all of this would have to be stripped and then the floor would have to be acid etched to open the concrete pores to allow sufficent adhesion (sp?) I wouldn’t recommend anyone not reasonably knowledgable in this area think about it. There are professionals out there that do it for a living and even they can screw the job up.
July 29, 2006 at 9:26 pm #146919Bwaite77ParticipantRon,
What your asking for, may not be what the owner is looking for.
I would imagine that you have either finished the job by now, or passed it by.
The owner is most likely looking for a hard sealer, like on wood floors.
I would check with the local building supplies and see what they offer. -
AuthorPosts
- You must be logged in to reply to this topic.