u-mate logo removal

Home › Forums › Heavens Best Forum › Misc › u-mate logo removal

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • November 27, 2006 at 9:30 pm #143476
    Anonymous
    Inactive

    What solution are you guys using to remove the residue left behind after logo removal?

    November 27, 2006 at 10:40 pm #148171
    ON02
    Participant

    I USED RUBBING ALCOHOL ON MINE WHICH WORKED OK. BUT I ALSO USED SOME SOLVENT ON THE BAD SPOTS WHICH WORKED BETTER.

    November 27, 2006 at 11:14 pm #148172
    Anonymous
    Inactive

    Razor scraper to get the logo off, apply Dry Solvent to the remaining glue, use the razor to scrape the bulk of the glue, and work the rest off with DS and a rag.

    November 28, 2006 at 1:50 am #148173
    hbottumwa
    Participant

    I used a gallon of gasoline, and a hand granade!
    Really I used the hair dryer and orange deoderizer to remove the glue residue. I than used the stainless steal cleaner. Looks great!

    November 29, 2006 at 5:37 am #148174
    NJ05
    Participant

    I put my logos over the old ones…no problem

    November 29, 2006 at 6:03 am #148175
    Anonymous
    Inactive

    Ha!

    December 3, 2006 at 2:07 am #148176
    Anonymous
    Inactive

    WD 40 and a blade could not be easier

    December 4, 2006 at 5:32 am #148177
    FL18
    Participant

    Wd-40 worked well for me also.

    Mike

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.