Home Forums Heavens Best Forum Pads & Buffers Buffer Wheels

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #144696
    NJ05
    Participant

    Don’t know if anyone needs or has replaced their wheels due to bearing failure. The bearings on my nobles buffer were shot so I looked into replacements. I could not find bearings only, you have to by the complete wheel at $25 or so each….I went to Ace” the helpful hardware place” and found bearings that fit perfect. The bearings were flanged on one side so I put 1 on the inner and 1 on the outer opening of each wheel, worked great and they cost $22 for the repair (4 bearings and washers). One drawback is , they are steal and may pose a rust issue, I will keep an eye on them and let you know how they hold up.

    #155212
    hbottumwa
    Participant

    Thanks Gary,
    Good info!

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.