Home Forums Heavens Best Forum Cleaning Products Protector Sprayer

Viewing 15 posts - 1 through 15 (of 16 total)
  • Author
    Posts
  • #143914
    IA43
    Member

    Does anyone else have a problem with this? I have one of the new ones that doesn’t have a threaded air intake and I can never get it to take air well. I’m just using a little hand pump. Anyone have any ideas?

    #150968
    hbottumwa
    Participant

    I don’t know if I have the newest one of not.
    Instead of the hand pump I use the pump using the cigarette lighter. I like it better.
    Others have installed a compresser or use a tank. Pump the tank up in the morming and your good for the day. Tank is about 2 1/2′ X 18″ X 18″.

    #150969
    CJones
    Participant

    Just out of curiosity, how many pounds of pressure will the sprayer take?

    #150970
    tjback
    Participant

    Jeff, I read somewhere that 80 lbs will be enough to empty the contents.

    #150971
    Larry young
    Participant

    the max psi is 200, i usually fill to about 130 and am good for a couple average jobs, it took me about 3 small compressors to find one with a good enough grip for the non-threaded stem

    #150972
    CJones
    Participant

    Thanks for the info!! I too have been getting tired of pumping by hand – ready for one these compressors which can plug into a power port!! Sounds like there has been some trial & error with the electric pumps – do any of ya’ll (yes, I’m from Texas – ha) have any brand/model recommendations??

    #150973
    IA43
    Member

    Yeah I’d love to hear of some good pumps to use as well. So with the electric ones you can fill it up once and it will last a while?

    #150974
    Anonymous
    Inactive

    I use a small Craftsman 120 volt electric air compressor ( approx 3 gal ) that I have mounted in my van. It normally last an entire day unless I do a large commercial job at the end of the day. I keep a 50 ft. drop cord in my van so I can plug it into a customers house if needed. This air compressor is about $100 but will last many years. I have one in my van, one in my eployees and one in my garage. Don’t buy the cheap off-brand compressors because they will not last. Also, the small 12 volt ones will only last a short time.

    #150975
    Anonymous
    Inactive

    I use a small 12 volt compressor that you can buy at any hardware store. True they don’t last more than a year or 2, but they are only about $12.00 or so.

    #150976
    Anonymous
    Inactive

    I recently purchased a new tool for inflating my stain protector canister. Sears makes an inflator in the configuration of a drill. It works on their 19.2 volt batteries. It’s rechargable and works great! I like it because it’s protable as well. It takes about 8-15 seconds to charge the canister depending on how much fluid is in the canister. That battery is also the one that goes to an extensive line of the Sears rechargable tools so I get dual purpose of the 3 batteries I have.

    #150977
    Linda Orr
    Keymaster

    I have an air tank in my van and a large air compressor in my garage. I can charge the air tank up to 120 lbs. and it fills the sprayer multiple times. In fact it usually lasts me at least a week. It takes me a couple of seconds to fill the sprayer. On large jobs I can take the air tank inside with me.

    #150978
    Linda Orr
    Keymaster

    It is also easy to refill the air tank at a gas station that offers free air. As far as the caps that don’t have threads, it is easy to hold on until charged and then just let go, and it pops right off.

    #150979
    Larry young
    Participant

    How many gallon tank are you useing Don?

    #150980
    Linda Orr
    Keymaster

    I use a five gallon tank. It has a pressure gauge on it so I can monitor when to recharge.

    #150981
    NJ05
    Participant

    I have been looking into a sprayer that is a power sprayer with a nice wand. They have adjustable tips (fan type) and deliver a much more even coat than the canister type.

Viewing 15 posts - 1 through 15 (of 16 total)
  • You must be logged in to reply to this topic.